|Place of Origin:||Ningbo,China|
|Minimum Order Quantity:||1SET|
|Packaging Details:||wooden pallet(standard) wooden case(option)|
|Delivery Time:||15-60working days|
|Payment Terms:||T/T, L/C|
|Max Container Capacity:||5L||Plastic Material:||PE,PP|
|Max Platen Thickness:||480mm||Carriage Movement Stroke:||450mm|
|Machine Size:||3.4×2.36×2.36||Machine Weight:||4.5Ton|
automatic extrusion blow molding machine,
extrusion molding machine
View strip line automatic extrusion blow molding machine for 1gallon lubrication oil container
MP70 is one of the most popular model for products below 5L
View strip optional
Double station or Single sation optional
1. adopt four position leader structure and supporting grider design, it is good at stability.
2.carriage moving design adopts tie-bar and linear guide,heavy and stong structure design make sure machine works more faster ,smooth and stable in fast cycle.
3. copper meatus connection between the platen and carriage ,self-detector distribute installed,make sure machine lubrication system are in super good condition.
4. adopt double proportional valve in hydraulic system, it is high-efficiency in production and low vibration in pressure.
5. Special protection for the machine and people
Sensor in the operating door: if anybody enter the machine,the electricity conneced with the machine will automatic cut down.
Temperature interlock system:When the material inside the barrel is not reaching the setting temperature,the extrusion motor can never start.that will help the screw and head of the machine.
6. Easy die head dis-assemble and assemble
7. adopt and prefer to use seamless and stainless meatus in hydraulic connection design from valve mainifoild to oil cylinder. compare to pipes,it is more stable to avoid oil leakage.
Center distance introduction:
Double head standard Center distance:160mm (170,180,200mm as option)
Thriple head standard center distance:120mm(100,120,125,130mm as option)
Four head standard center distance:100mm(90mm as option)
Six head standard center distance:60,70mm
Mainly applicable field:
a) Pharmacy packing and cosmetic field:including madicin bottles, eyedrop bottles,cosmetic bottles.
b) Auto parts: air-contidional pipes,oil tank,water tank,hollow parts from the auto.
c) Food and beverage packing:beverage bottles(milk container,juice bottles ,jar)
d) Oil and chemical field: petrol jars,oil barrel,painting buckets other chemical packing and tray,cleanser bottles….
e) Toys: body of revise pens,gumwater bottles,sand beach balls,hollow toys(including stationary toys ,collection jars and big assembled slide ladder…..
f) Other applicable area:tool boxes,pesticide bottles,atomizer,bed bords, desk bords,basketball bord
|Max container capacity||L||5|
|Number of die||set||1,2,3,4,6|
|Platen opening stroks||mm||180-480|
|Stroke of mould board||mm||300|
|Max mould size(W×H)||mm||400×420|
|Screw L/D ratio||L/D||24|
|Number of heating zone||zone||3|
|Extruder heating power||kw||14.5|
|Power of screw-bar machine||kw||0.18|
|Extruder driving power||kw||18.5|
|Number of heating zone||zone||2|
|Power of die heating||kw||6.5|
|Max die-pin diameter||mm||130|
|General power of machine||kw||42.68|
|Power of the electric motor of oil pump||kw||9.5|
|Average energy consumption||kw||23|
|Using quantity of compression air||m3/min||1.5|
|Using quantity of cooling water||m3/min||1.5-2.5|
Machine parts photo
Defleshing system type:Push on top and bottom with air cooling system.
Complete defleshing share the same platen with Mould back platen,more accurate and easy changing.